Especificación
Supplier | TODO EN UN Battery Technology Co Ltd. |
Modelo | CATL LF228 230Ah LiFePO4 3.2V Battery cell |
Capacidade real | Tested over 230Ah |
Tensión nominal | 3.2v |
Corrente de descarga máxima | 1C/ 230A |
Tensión de carga máxima | 3,65V |
Resistencia á impedancia de CA. | ≤0,5 mΩ |
Temperatura de carga | 0-60℃ |
Temperatura de descarga | -30-60 ℃ |
Ciclo de vida | 6000 times SOC 80% |
Peso | 4,2 kg |
Dimensións (L * W * H) | 174*54*208mm |
Aplicacións | Solar Energy Storage Systems,automotive,Home storage and organization,New Energy Passenger Car,New Energy Bus,New Energy Professional Car,New Energy Construction,New Energy Ship,Telecom ESS,Grid ESS,Energy Storage on Power Generation,Energy Storage on Power Consumption,off-grid and island/isolate systems,UPS backup power |
1. Alta tensión e tensión de descarga estable
2. Tempo de traballo máis longo e de alto rendemento
3. Peso lixeiro con pequeno tamaño
4. Excelentes propiedades de descarga e pequenas resistencias internas
5. Sen efecto de memoria, boa capacidade de descarga e alta carga e resisten a alta temperatura
6. Sen contaminación para protección ambiental
7. 100% auténtica batería recargable de li-ion orixinal
8. Bulido en protección contra explosións e protección de circuítos
Nota
1.This item is Original Grade A CATL 230Ah LiFePO4 cell, the QR code is intact, Grade A+, Brand new.
2. After our test, the maximum discharge capacity can reach 240Ah.
3.The price come with Free Bus bars and Bolts. one battery will come with one set bus bar and bolt(e.g.,If buy 4pcs battery,we will send 4pcs cells with 4 pcs busbars and 8pcs bolts)If need more please contact us online.Thank you!
4. One battery with one insulation battery sheet
5. The bus bars size: 75*20*2mm(cooper plated with nickel) Screw size: M6
6.We tested every battery cell's Voltage ,Internal resistance before shipping out from China.
Important & Warmly Reminder
Batteries should be stored (more than 1 month) indoor with a dry and clean environment at 0 ℃~35 ℃.
Avoiding contact with corrosive substances and staying away from fire and heat source. The battery should be charged and discharged every 6 months.The SOC for storage is between 30% ~ 50%
1. When the battery is charged and discharged, the conditions for monitoring and protecting the battery voltage, current and temperature shall be ensured.
2. Please keep the battery away from the heat source, fire source and other corrosive environments such as water,heating, strong acid and strong alkali.
3. Do not short circuit the battery or install it with incorrect polarity at any time,otherwise it can cause serious damage to the battery and cause danger.
4. Do not mix batteries of different models or manufacturers.
5. Do not use external force to make the battery fall, impact or puncture. Do not disassemble the battery or change the external structure.
6. When the battery is not used for a long time, please keep the battery in the state of 30%-50% SOC, and avoid the environment of strong direct sunlight or high temperature and humidity.
7. When operating the battery, it is necessary to wear rubber gloves and other protective devices.
8. In case of leakage, smoke or damage of battery, please stop using immediately.
9. DIY battery pack must be getting the cells balanced before assembly.
Estas situacións non proporcionan devolución nin reembolso
*After the assembly or assembly process happen any problem, such as the protection board connected to the wrong wire burned lead to battery damage, charger failure, the assembly error or unbalanced assembly, etc.
*For damage caused , such as battery bulge/welded, battery pack without protection BMS caused by charging.
Tip: These products are batteries only, without protection board,you need to purchase a match one! You can check our shop and search BMS.
Mensaxería e loxística
In addition, because the battery is prohibited product, many courier and logistics are unable to send, the arrival will indeed be slower, so please wait patiently after place an order.
Aplicación
A nosa fábrica
1. Somos un provedor con 10 anos de experiencia. Todos os nosos artigos veñen con alta calidade e bo servizo posvenda.
3. Calidade estable - Ven dun provedor de materiais superior e un sistema de control de calidade perfecto.
4. Prezo competitivo que calquera outro provedor.
5. 7/24 servizo para ti, toda a pregunta será tratada dentro de 24 horas.
Embalaxe e envío
R: Si, recibimos a orde de mostra para probar e comprobar a calidade. As mostras mixtas son aceptables.P2. E o tempo de entrega?
R: A mostra precisa 3-5 días, o tempo de produción en masa precisa de 1-2 semanas para a cantidade de pedido máis que
Q3. ¿Tes algún límite de MOQ para a batería de litio?
R: O MOQ baixo, 1pc para a comprobación da mostra está dispoñible
Q4. Como envías a mercadoría e canto tardas en chegar?
R: Normalmente enviamos por DHL, UPS, FedEx ou TNT. Normalmente tardan 3-5 días en chegar. O transporte aéreo e marítimo tamén é opcional.
Q5. Como proceder unha orde para batería de iones de litio?
R: En primeiro lugar, infórmanos os teus requisitos ou solicitudes.
En segundo lugar citamos segundo as túas necesidades ou as nosas suxestións.
En terceiro lugar, o cliente confirma o depósito de mostras e lugares para solicitude formal.
En cuarto lugar Organizamos a produción.
Q6. ¿Podemos asinar un acordo de segredo se queremos construír unha relación comercial a longo prazo?
R: Por suposto, respectamos os requisitos dos clientes, traeráselle máis beneficios.
P7: ¿Ofrece garantía para os produtos?
R: Si, ofrecemos 12 meses de garantía aos nosos produtos.
P8: ¿Acepta OEM / ODM?
R: Por suposto, a orde personalizada está dispoñible, co pracer de servirche.
A: usually it takes 5 hours with 20A standard charger.